Monfongs 888 Twinair technology is based on the Monforts Germany stenter range. This model combines the most recent developed technology to evolve a more advanced energy saving stenter range.

Advanced squeezing roller : The Matex 6000 of this stenter is equipped with our newest high efficiency parallel padders which could lower the pickup in the same time keep the fabric hand-feel. This could lead to less energy to evaporate the water content of fabric after passing through the padders. This lower energy consumption could contribute the textile industry to achieve low carbon release target a step further.

Energy saving design: There is a energy saving design. This is achieved by placing one sensor at the fabric outlet opening of the last chamber, it could reduce the fan speed of exhausted air by detection of temperature variation and result in avoiding excessive incoming cold air to the chambers. This control of exhausted air is also achieved by a photo-electric sensor placing at inlet track. When it detects no fabric at the pins, the system will lower the speed of circulation fans and the fans of exhausted air. This design will avoid unnecessary energy wasting through controlling the air fan speed of exhausted air.

TwinAir : Monforts patented Twin-Air technology allows top and bottom airflow to be regulated separately. It results in drying without marking and the most even temperature possible across the fabric.

Nozzle System CAD Stream: its “Lay-on-Air”fabric supporting properties in air and with bulking effect through increased volume by its micro tumbler effect. Attractive cost/benefit ratio with higher evaporation rates. It also provides continuous fabric support even at the chamber transition points.

Qualitex 750 Plus : The new control system Qualitex 750 plus could be adapted to run with OPC protocol. With this system, it still inherits adaptation of current Monfongs software and newest developed device respectively like Q-soft, Monformatic, Mobile apps and Themat, Eco-booster heat recovery device, Dis-O-Clean device and etc. This system gives edged control technology to dry fabric processing and compatible to connecting of most popular central control system in the market.

New Options : By the virtue of new control system, it could adapt to different new options like Oil drop prevention device, Motorized flap door of integrated exhausted duct, Fire extinguisher system and etc.

For decades, the Montex stenter frame has been a global synonym of top-rate technology for best results in the finishing treatment of woven and knitted fabrics. New features make the outstanding Montex 6500 Omni now even more economical in operation, more universal in use and improve its ecobalance even further. Additionally, there are special solutions for pigment dyeing processes and the even more profitable finishing of knitted fabrics.

JetAir 5000 is designed for both woven and knitted fabrics with feed either open width or tubular form. The models, available in the common nominal widths, are of modular design. Fabric has the best opportunity to shrink to its original status; reduce the residual shrinkage to as low as 5% in both widthwise and lengthwise. The machine is suitable for all kinds of fibers, both natural and chemical and fabrics in woven, weft knitted and warp knitted . The speed range is 5 -100m /min.

Applications

* Drying after dyeing for cotton and its blends fabric

* Tumbling for bulky effect

* Tensionless predrying before heatsetting

Main Features:

* High efficiency squeezing padder

* Stretching field

* Relaxation dryer

* Vibratronic device

Advantages: :

* Reduce the residual shrinkage of cotton fabric

* Improve the bulky effect

* Shorten the classic finishing cycles of cotton knits

* Energy saving

* Uniform and flat cloth selvedges

For continuous dyeing/curing process

Thermex 6500 Hotflue is based on modular design. This allows to have the shortest commissioning times.

Features:

* Uniform air delivery via slot nozzles

* Uniform temperature

* Uniform fabric finish

* Migration protection by virtue of thermo-cut system

* Highly effective 150mm insulation for reduced thermal energy consumption

* Generously dimensioned window for monitoring the fabrics passage

* Fabric capacities

* Thermex B, 35m with 140mm roller diameter,31m with 180mm roller diameter.

* Thermex C, 51m with 140mm roller diameter, 46m with 180mm roller diameter.